Guidance Testing & Inspection
Solution > Industry > Plant safety: Subassembly evaluation Solution: Plant safety: Subassembly evaluation Guidance Testing & Inspection Solution: Plant safety: Subassembly evaluation Dipl.-Ing. Dr. Martin Doktor Dipl.-Ing. Dr. Martin Doktor Deutschstraße 10 1230 Wien Österreich +43 5 0454 6137 Send email Deutschstraße 10 1230 Wien Österreich Save to My Bundle Dipl.-Ing. Dr. Martin Doktor Save to My Bundle TÜV AUSTRIA Vertrieb TÜV AUSTRIA Vertrieb Deutschstraße 10 1230 Wien +43 5 0454 1700 Send email Deutschstraße 10 1230 Wien Save to My Bundle TÜV AUSTRIA Vertrieb Save to My Bundle TÜV AUSTRIA GMBH TÜV AUSTRIA GMBH Region: Österreich Deutschstraße 10 1230 Wien Österreich +43 5 0454 0 Send email Deutschstraße 10 1230 Wien Österreich Save to My Bundle TÜV AUSTRIA GMBH Save to My Bundle Subassembly evaluation In which region do you need this solution? Austria Romania Cyprus Switzerland Germany Turkey Greece Spain Italy Belgium English Czech Republic Poland Slovenia Albania Portugal United Kingdom KSA Egypt India All accreditations "Subsystem safety concepts, fundamentals for the required conformity assessment of subassemblies, support in implementing Machinery Directive" Subassemblies are functional units consisting of a wide variety of individual components or systems. Typical process plants are made up of machines, pressure equipment and components to control and regulate the processes. The size of subassemblies ranges from relatively small units to complete systems. To ensure safe operation of the overall plant, safety equipment for the individual devices and use of tested individual parts are both essential. In addition, the specific hazards arising from the interaction of individual components in complex systems must be taken into account. This requires a comprehensive overall safety concept to reliably protect people, the environment and property. Consulting on required documentation Performance of a systematic safety analysis, tailored to your specific problem Assessment of the safety concept according to the requirements of Pressure Equipment Directive 2014/68/EU Assessment of the safety concept according to the requirements of Machinery Directive 2006/42/EC (formerly 98/37/EC) Assessment of conformity according to the current status of the rules and regulations as well as the legal framework conditions Consulting in the preparation and assessment of safety concepts for subsystems Development of the fundamentals for the required conformity assessment of subassemblies according to Pressure Equipment Directive 97/23/EC Support in implementing the requirements of the Machinery Directive 2006/42/EC (formerly 98/37/EC) and other applicable directives More Tags: AOJ II 309/2004 Assembly evaluation Cellulose Chemistry Directive 1999/92/EC Energy supplier EX Explosion safety Food Food industry Hazard analysis Industry Machinery Directive (2006/42/EC)Paper Petrochemistry Pharmaceuticals industry Plant safety Pressure Equipment Directive 2014/68/EU Recycling Risk analysis SEVESO Steel Trade Regulations Act (AOJ I 88/2000)VEXAT Waste recycling Related solutions from the same sector: Industry Plant safety: Explosion protection document Industry Show more Save to my Bundle Emission measurement of air pollutants Industry Show more Save to my Bundle Mechanical testing laboratory and workshop Industry Show more Save to my Bundle Corrosion Mapping – Phased Array (PA) Industry Show more Save to my Bundle All Solutions Discover more sectors: Agriculture Automotive Certification Communications Technology Construction & Real Estate Electronics Energy Foodstuffs Health & Medicine IT & Security Leisure & Entertainment Machinery Municipalities Science & Research Sports & Fitness Sustainability Tourism Trade & Commerce Transport & Traffic Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at
Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at

Solution > Industry > Plant safety: Subassembly evaluation

Solution: Plant safety: Subassembly evaluation

Subassemblies are functional units consisting of a wide variety of individual components or systems.

Typical process plants are made up of machines, pressure equipment and components to control and regulate the processes. The size of subassemblies ranges from relatively small units to complete systems.

To ensure safe operation of the overall plant, safety equipment for the individual devices and use of tested individual parts are both essential.

In addition, the specific hazards arising from the interaction of individual components in complex systems must be taken into account.

This requires a comprehensive overall safety concept to reliably protect people, the environment and property.

Consulting on required documentation
Performance of a systematic safety analysis, tailored to your specific problem
Assessment of the safety concept according to the requirements of Pressure Equipment Directive 2014/68/EU
Assessment of the safety concept according to the requirements of Machinery Directive 2006/42/EC (formerly 98/37/EC)
Assessment of conformity according to the current status of the rules and regulations as well as the legal framework conditions

Consulting in the preparation and assessment of safety concepts for subsystems
Development of the fundamentals for the required conformity assessment of subassemblies according to Pressure Equipment Directive 97/23/EC
Support in implementing the requirements of the Machinery Directive 2006/42/EC (formerly 98/37/EC) and other applicable directives