Guidance Testing & Inspection
Solution > Plant Safety: FMEA & FMECA Solution: Plant Safety: FMEA & FMECA Guidance Testing & Inspection Solution: Plant Safety: FMEA & FMECA Dipl.-Ing. Dr. Martin Doktor Dipl.-Ing. Dr. Martin Doktor Deutschstraße 10 1230 Wien Österreich +43 5 0454 6137 Send email Deutschstraße 10 1230 Wien Österreich Save to My Bundle Dipl.-Ing. Dr. Martin Doktor Save to My Bundle TÜV AUSTRIA Vertrieb TÜV AUSTRIA Vertrieb Deutschstraße 10 1230 Wien +43 5 0454 1700 +43 5 0454 71700 Send email Deutschstraße 10 1230 Wien Save to My Bundle TÜV AUSTRIA Vertrieb Save to My Bundle TÜV AUSTRIA GMBH TÜV AUSTRIA GMBH Region: Österreich Deutschstraße 10 1230 Wien Österreich +43 5 0454 0 Send email Deutschstraße 10 1230 Wien Österreich Save to My Bundle TÜV AUSTRIA GMBH Save to My Bundle FMEA & FMECA: Fehlerzustandsart- und Auswirkungsanalyse In which region do you need this solution? All accreditations "FMEA startet mFMEA starts with the failure of a component and then considers the effects of this failure on the overall system." FMEAs (Failure Mode and Effect Analyses) are usually carried out in interdisciplinary teamwork. FMEA starts with the failure of a component and then considers the effects of this failure on the overall system. Very often, only FMEA is spoken of, although it is actually FMECA (Failure Mode and Effects and Criticality Analysis). While an FMEA provides purely qualitative results, the FMECA assesses the risk, as is the case in most automotive industry worksheets. The FME(C)A is mostly used in the production of mass-produced components and is not so widely represented in process industry. It is commonly used to determine the quality of a barrier or individual components within the barrier. More Tags: AOJ II 309/2004 Assembly evaluation Cellulose Chemistry Directive 1999/92/EC Energy supplier EX Explosion safety FMEA FMECA Food Food industry Foodstuffs Hazard analysis Industry Machinery Machinery Directive (2006/42/EC)Paper Petrochemistry Pharmaceuticals industry Plant safety Pressure Equipment Directive 2014/68/EU Recycling Risk analysis SEVESO Steel Trade Regulations Act (AOJ I 88/2000)VEXAT Waste recycling Discover more sectors: Agriculture Automotive Certification Communications Technology Construction & Real Estate Electronics Energy Foodstuffs Health & Medicine Industry IT & Security Leisure & Entertainment Municipalities Science & Research Sports & Fitness Sustainability Tourism Trade & Commerce Transport & Traffic Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at
Martin Doktor +43 5 0454 6137 \| martin.doktor@tuv.at

Solution > Plant Safety: FMEA & FMECA

Solution: Plant Safety: FMEA & FMECA

Guidance Testing & Inspection

Dipl.-Ing. Dr. Martin Doktor

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 6137

Send email

TÜV AUSTRIA Vertrieb

Deutschstraße 10 1230 Wien

+43 5 0454 1700

+43 5 0454 71700

Send email

TÜV AUSTRIA GMBH

Region: Österreich

Deutschstraße 10 1230 Wien Österreich

+43 5 0454 0

Send email

FMEA & FMECA: Fehlerzustandsart- und Auswirkungsanalyse

In which region do you need this solution?

"FMEA startet mFMEA starts with the failure of a component and then considers the effects of this failure on the overall system."

FMEAs (Failure Mode and Effect Analyses) are usually carried out in interdisciplinary teamwork.

FMEA starts with the failure of a component and then considers the effects of this failure on the overall system.

Very often, only FMEA is spoken of, although it is actually FMECA (Failure Mode and Effects and Criticality Analysis). While an FMEA provides purely qualitative results, the FMECA assesses the risk, as is the case in most automotive industry worksheets.

The FME(C)A is mostly used in the production of mass-produced components and is not so widely represented in process industry. It is commonly used to determine the quality of a barrier or individual components within the barrier.