Accreditations and Authorizations Overview TÜV AUSTRIA
TÜV AUSTRIA is an accredited certification body for the following areas
Accredited certification authority for management systems in accordance with the applicable legal framework and ISO/IEC 17021-1 for
- Quality management systems in accordance with ISO 9001
- Environmental management systems in accordance with ISO 14001, EMAS validation, EN ISO 50001
- Safety management systems in accordance with SCC, SCP, ISO 45001 (succession standard of OHSAS 18001) and SA 8000
- Food safety in accordance with ISO 22000
- Energy management systems in accordance with ISO 50001
- Quality management systems for medical devices according to EN ISO 13485
- Quality management systems for educational organisations according to ISO 21001, providers of learning services according to ISO 29990 and ISO 29993
- ISO/IEC 27001 and ISO/IEC 27701 for IT security
- ISO 22301 through ESYD for operational continuity management
- ISO 37001 through ESYD for anti-bribery management systems
- ISO 39001 through ESYD for road safety
- ISO 41001 thorugh ESYD for facility management
- EN 15224 through ESYD for quality management systems in health care
- Railway safety management systems according to Regulation EU 2018/762 (succession regulation of EU 1158/2010 and 1169/2010)
Accredited certification authority for products, methods and services in accordance with the applicable legal framework and IS0/IEC 17065 for
- Environmental protection, healthcare, safety
- Food technology
- Handling equipment, hoisting devices
- Construction industry, pressure devices, elevators, building materials, road signs
- Safety components for cable cars
- Private and commercial residential, entertainment, games, sport
- Electronic Signatures (Trust Service Providers)
- Telecommunication
- GLOBAL GAP & ELOT Standard (Greece)
- eIDAS & Trust Services
- Certification of security service providers
- FGAS (fluorinated greenhouse gases) certifizication
- ITU – Good agriculture practices
Accredited certification authority for personnel in accordance with the applicable legal framework andIS0/IEC 17024 for
- Welding and brazing technology (ISO 9606-1 to -5, ISO 13585, ISO 14276-1, ISO 14732, EN 13067, EN ISO 17660-1 and -2, ÖNORM M 7807, AD 2000 HP 2/1, AD 2000 HP 3, AD 2000 HP 5/2, TRD 201 Unit 2), ASME Section IX, API 1104, AWS D1.1, AWS D1.5, 2014/68/EU Annex I 3.1.2
- NDT personnel certification
- Proficiency according to ÖNORM F1053 (“Extinguishing station”)
- SCC persons
- SDS (Safetys Data Sheet) Preparer
- Personnel for conditional monitoring and diagnostics of machines
- Chemical Assessment Specialist
- Technical safety experts
- Construction Machinery Operator, Scaffold Technicians, Maintenance Technican, Insulation Technicians and Smart Buildings Programming Technician by ESYD
- Process and Senior Process Manager
Authorized certification body according to IngG 2017
Accredited testing and inspection authority in accordance with the applicable legal framework, IS0/IEC 17020 and IS0/IEC 17025 for
- Elevators/elevator components
- Construction technology
- Electrical engineering
- Railway technology
- Measurement technology
- Explosion protection
- Fire protection
- Plant and machine safety as well as cranes-hoists-gates
- Cable cars
- Electrical & Environmental (environmental simulation, electrical safety of devices, EMC properties, radio systems, communications equipment and systems)
- Medical and hospital technology
- Automotive engineering/hazardous materials
- Personel Protective Equipment
- Technical physics
- Environmental protection
- Materials and welding technology
- Pressure technology
- Game, sport and leisure equipment
- Light fixtures and household appliances
- Technology and law (commercial law, piping law and railway law, electricity and electric power industry act)
- Destructive and non-destructive testing
- Packaging recoverable through composting and biodegradation
- Cybersecurity in industrial automation IEC 62443
- Physical-chemical analysis
- Microbiological test
- Product safety (lights and household appliances)
- Electricity and gas certificates of origin
Accredited inspection body for waste assessment according to DVO 2008 Annex 4
Accredited calibration authority in accordance with the applicable legal framework, calibration regulation and ISO/ IEC 17025 for
- Pressure, temperature
- Torque, power (materials testing machines)
Accredited verification body for greenhouse gases in accordance with the applicable legal framework and EN IS0 14063
- (EU) No. 600/2012 verification of greenhouse gas emission reports and tonne-kilometre reports
Accredited testing and inspection authority in accordance with
- Hoisting Apparatus Operating Ordinance 2009 (HBV 2009)
Accredited inspection authority according to ISO 17020 TCB/CAB according to MRA EU-USA: registration offce for
- Wireless devices and EMC for the United States
- Approvals of wireless devices and EMC tests for the United States according to “MRA – Multilateral Recognition Agreement” between the EU and the USA
Authorized Inspection Agency in accordance with the provisions of NB-360, National Board Acceptance of Authorized Inspection Agencies (AIA) Accredited by ASME
- Accreditation to provide third party inspection services for repairs and alterations in accordance with the National Board Inspection Code.
Authorised Inspection Agency for performance of inspection activities according to the “ASME Boiler and Pressure Vessel Code” for
- Sections I, IV und VIII
- Divisions 1, 2 & 3
Appointed/registered/competent authority (Notified Body identification numbers: 0066, 0408, 0532, 0906, 1735, 2414, 2579, 2737, RTP0) according to European Directives for
- 2014/29/EU Simple Pressure Vessels
- 305/2011 Construction Products
- 89/686/EEC Personal Protective Equipment
- 92/42/EEC Hot Water Boilers
- 2014/34/EU Explosion Protection
- 2014/33/EU Elevators and Safety Components for Elevators
- 2014/68/EU Pressure Equipment, Approval of personnel (categories II, III and IV)
- 2014/53/EU Radio and Telecommunications Terminal Equipment
- 2010/35/EU Portable Pressure Equipment
- 2016/424/EU Cable Cars for Human Transport
- 2016/425/EU Personal Protective Equipment
- 2000/14/EC Noise Emission in the Environment by Equipment for Use Outdoors
- 2014/30/EU Electromagnetic Compatibility
- 2006/42/EC Machines/Safety Components
- Various international directives for vehicle components, conversions, and similar (ECE, EC)
Approved test center according to
- Elevator Safety Directive (ASV)
- Lifting Systems Operational Regulations (HBV 2009)
- Construction Machinery Noise Regulation
- Machinery Safety Ordinance
- Telecommunications Act
- PPE Safety Regulation
- Mineral Raw Materials Act
- Petroleum Mining Police Ordinance
External Body for the Cable Car Testing Regulation (SeilbÜV)
Specialized Body, Safety Expert, Safety Technical Center, etc. in accordance with the Austrian National Regulation for Occupational Health and Safety
Specialized Body under the Construction Worker Protection Regulation
Accredited Training Center for Safety Professionals in accordance with the Regulation on the Training of Safety Engineers
Training and testing centre for non-destructive testing in Austria
Authorized training center in accordance with the Proof of Expert Knowledge Regulation
Approved as environmental verifier organization under the EMAS regulation in accordance with the Environmental Verifier and List of Sites Act
Technical services according to
- Automotive Technology through Federal Motor Transport Authority (basis ISO/IEC 17025)
- EC FGV (Vehicle Approval Regulation), FzTV [Vehicle Parts Regulation], StVZO [Road Traffic Licensing Regulations] and Vehicles and Vehicle Parts Federal Motor Transport Authority
- ECE regulations
- Category A,B,C,D in accordance with EC framework guidelines
Independent test center and individual inspector according to Emissions Certificate Act and Expert Knowledge Regulation
- Independent test center and individual inspector for the verification of CO2 emissions
- Authorized expert according to the Emission Protection Act
- for Boiler Systems (EC-K)
Testing laboratory for playground equipment
- Main testing according to EN 1176
- Operational inspections according to EN 1176 and EN 1177 Testing and certification authority for the GS mark (ZLS)
Approved inspection body according to the operational safety regulation for elevators and pressure equipment
Notified Body (GCC Mark) for toys and low voltage electrical equipment (GSO)
CB Testing Laboratory (IECEE)
Authorized body for services in the field of export Conformity
- Egypt (GOEIC)
- Algeria (LC)
- Iraq (CSQC)
- Libya (LC)
- Saudia Arabia (SABER-SASO, SFDA Food, SFDA Cosmetics)
- Sudan (SSRO)
- USA & Canada
Authorized Inspection Agency for performance of inspection activities to cover Sections I; IV; and VIII, Divisions 1, 2 & 3 of the ASME Boiler and Pressure Vessel Code
Check certificate
I am looking for a solution but do not know its title.
